4" Drill Press Vise

4" Drill Press Vise Review

UPC: 794685561825

4" Drill Press Vise

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount Review

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount Feature

• Capacity: 1/32"-1/2"
• 33 Jacobs Taper

Premium Quality Import - With Key. fits onto a 33 Jacobs Taper arbor or spindle.

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter Review

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter Feature

• Extra-large spindle bearings, spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings
• Wide, test-proven speed range, true 10-to-1 speed ratio, 450 to 4,700 rpm with a 1,725 rpm motor
• Quick belt tension release is provided by the pivoting motor mounting plate, reverse self-locking taper on the plunger
• Extra-long quill travel gives extra depth for deep-hole jobs like skip and gang drilling
• Six speeds offers unbelievably wide range of speeds

The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

5 Speed - Bench Top Drill Press

5 Speed - Bench Top Drill Press Review

5 Speed - Bench Top Drill Press Feature

• 1/2 HP,
• 120 V, 60 Hz, 2.4 amp
• 5 Quick change speed settings,

Ideal addition to any workshop, 1/2 HP, 120 V, 60 Hz, 2.4 amp, 5 Quick change speed settings, No load speed 760-3070 RPM, 1/2" drill chuck, Quill travel - 50mm, Drilling depth is adjustable with positive quill stop., For mortising, it is good to have a long quill travel and a positive quill stop for reproducibility. Press height: 22 1/2", Sturdy 11" x 7" base, Adjustable table tilts left or right for angled drilling operations, Distance from center of chuck to the support pole is 4", Table size 6 3/8" x 6 3/8", 3 prong plug, UL listed

IRWIN 226340 4-Inch Drill Press Vise

IRWIN 226340 4-Inch Drill Press Vise Review

IRWIN 226340 4-Inch Drill Press Vise Feature

• 4-Inch Jaw Width
• 4-1/2-Inch Clamping Capacity
• 1/2-Inch Throat Depth

Whatever the dimensions of your project or the materials used, IRWIN has the clamping tools to help you achieve professional results faster and easier.

WoodRiver 14-LED Drill Press Light

WoodRiver 14-LED Drill Press Light Review

WoodRiver 14-LED Drill Press Light Feature

• 14 white light LEDs arranged in a circular housing
• Fits drill presses with quill diameters 1-5/8" to 3-7/8"
• Strong magnet fixes switch to any steel or cast-iron surface
• Installs without tools using three thumbscrews
• Power supplied by a wall transformer

Every drill press naturally casts a shadow on your workpiece, so some sort of extra light is a necessity for safe effective operation. By attaching this LED light to the drill press quill it becomes the most efficient light source available.

Craftsman 10 in Bench Drill Press w/ Laser Trac

Craftsman 10 in Bench Drill Press w/ Laser Trac Review

Craftsman 10 in Bench Drill Press w/ Laser Trac Feature

• Five operating speeds with a range between 620 - 3100 RPM
• 6.0 Amp, 120 Volts, 60 Hz motor
• Rack and Pinion table elevation makes adjusting the table height easy and accurate
• Scaled steel fence helps align, guide and brace workpieces, stop block for repetitive drilling jobs

Powerful 6.0 Amp motor provides this Craftsman® drill press with long lasting and smooth operation for household projects. 1/2" keyed chuck, ideal for metal or wood drill bits and sanding drums with up to a 1/2" shank. Five speed settings ranging from 620-3100 RPM. Quick belt tension and release - allows for rapid spindle speed changes. Rack and Pinion table elevation system for quick and easy adjusting.

Rockwell RK7032 Shop Series 10-Inch Drill press

Rockwell RK7032 Shop Series 10-Inch Drill press Review

Rockwell RK7032 Shop Series 10-Inch Drill press Feature

• 5 speed gear box
• Powerful 3.6 amp motor
• Bevelling table 0 - 45 degrees left and right

Shop series 10'' drill press. Powerful 3.6 amp motor and the 5 speed gear box deliver great performance. Spindle travel is 2 3/8'', the throat depth is 5'', and the column diameter is 2 3/4''. The table is 7 7/8'' square and bevels from 0 to 45 left and right. The base size is 14'' x 9 1/4'' and the whole thing weighs 79.2 lb. It comes with a spanner wrench and chuck key. Uses a 59 1/2'' bandsaw blade.

Proxxon 27100 Micro Compound Table KT 70

Proxxon 27100 Micro Compound Table KT 70 Review

Proxxon 27100 Micro Compound Table KT 70 Feature

• Clamping accessories for easy attachment on or below the MB140/S, TBM115 and MS4 come with the micro compound table; can also be used with other drill stands or drill presses
• Adjustable ruler facilitates positioning of cross slide; covered spindle to protect from dirt; one set (2-Piece) of step clamps are included, set up ease
• X-travel 5-9/32-Inch (134mm), Y-travel 1-13/16-Inch (460mm), overall height 1-11/16-Inch (43mm)
• Fits drill press no.38128 and drill stand no.28606

Designed for accuracy, this compound table makes precision boring and milling an easy task. Table is made of surface treated solid aluminum and fitted with adjustable dovetail slides and three T-slots.Table size is 7-7/8" x 2-3/4". X travel is 5-7/32" and Y is 1-3/16", overall height 11-1/16". The adjustable scale eases work piece positioning. Both hand wheels have adjustable dials that can be zeroed out for precise machining. Handwheel graduations: 1 revolution = 1mm (.04") and 1 division = 0.05mm (0.002"). Includes clamps and securing bolts. Photographed on a Proxxon Drill Press (not included).

Proxxon 28606 MICROMOT Drill Stand MB 140/ S

Proxxon 28606 MICROMOT Drill Stand MB 140/ S Review

Proxxon 28606 MICROMOT Drill Stand MB 140/ S Feature

• 4-3/4 inch by 8-11/16 inch table is milled and fitted with a fence and scale
• Solid column is chrome plated and the headstock is of die cast aluminum for precision and corrosion resistant use
• Chromed feed lever operates via drive disc and ball bearing system offering very sensitive feed set-up

Proxxon MICROMOT Drill Stand MB 140/S. All PROXXON MICROMOT hand-tools with the 3/4'' standard collar perfectly fit this drill stand. It provides the steadiness when needed and turns your rotary tool into a mini drill press, e.g. for drilling very fine holes. The drill stand even makes your rotary tool more versatile as it holds it horizontally, too, so that you can use it like a bench grinder. The drill stand keeps the tool lined up and allows you to control it easily with one hand. NOTE: Rotary Tool and Vice Clamp in picture not included. See details.4-3/4 inch by 8-11/16 inch table is milled and fitted with a fence and scaleSolid column is chrome plated and the headstock is of die cast aluminum for precision and corrosion resistant useChromed feed lever operates via drive disc and ball bearing system offering very sensitive feed set-up

1/4" Mini Drill Press with 3 Range Variable Speed Control 0-8500 Rpm

1/4" Mini Drill Press with 3 Range Variable Speed Control 0-8500 Rpm Review

1/4" Mini Drill Press with 3 Range Variable Speed Control 0-8500 Rpm Feature

• Permanent magnet motor with variable speed control
• Infinite speed selection within the machine's three speed ranges (0-5000, 0-6500, and 0-8500 RPM)
• Jacobs-style chuck will accommodate drills from 0.79 to 6mm dia. (1/4")

# Permanent magnet motor with variable speed control # Infinite speed selection within the machine's three speed ranges (0-5000, 0-6500, and 0-8500 RPM) # Jacobs-style chuck will accommodate drills from 0.79 to 6mm dia. (1/4") # Electrical 110 VAC, 60 Hz # Max. Chuck Capacity 6mm # Spindle travel 1" # Column dia. 1.250" # Work surface 6.750" x 6.750" # Throat 4" # Overall height 13.5" # Width 7.5" # Depth 10" # Chuck key Included

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press Review

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press Feature

• Powered by a heavy duty 1HP, 1Ph, 115/230V TEFC motor for maximum torque
• Head mounted dual laser guide system provides a consistent drilling cross point on workpiece
• A new, larger table system with dual extensions for the largest woodworking table on the market; features twin T-slot grooves for a miter gauge or other homemade jigs
• Built-in dual LED work light eliminates cast shadows
• Newly designed table tilts 90° and has a positive stop at 0°

Designed with the needs of the professional woodworker in mind, the Powermatic Onyx PM2800 18-inch variable-speed 90th anniversary limited edition drill press offers innovative features other models simply cannot match. Built for ultra-dependable performance, the Onyx PM2800 features dual LED work lights and a dual laser guide system. Both the expandable work table and motor are the industry's largest in the PM2800's class.

Onyx PM2800 90th Anniversary Limited Edition Drill Press At a Glance: Features Carter quick-tension lever for speedy blade changes Easy to read tensioning gauge settings indicated in blade width increments Precision balanced, nine-spoke cast-iron wheels reduce vibration 60-watt adjustable lamp built into the body (bulb not included) Rigid, one-piece welded stand that requires no assembly

Powermatic's Onyx PM2800 90th anniversary drill press has a host of innovative features (view larger.)

Durable and Versatile
With high-end castings and ultra-tough steel components, the Onyx PM2800 is as durable as it is versatile. The three-and-one-eighth-inch diameter steel column, oversized quill, and cast-iron table system provide the rigidity needed for true accuracy and repeatability. The all cast-iron base offers stability, decreases vibrations, and comes with holes in each corner for securing the Onyx PM2800 to a suitable floor. For incredible versatility, the Onyx PM2800 offers a full 18-inch swing, a spindle-to-base clearance of 47 inches, and a maximum spindle-to-table capacity of 26-1/2 inches.

Powerful One-Horsepower TEFC Motor
The Onyx PM2800 comes equipped with a heavy-duty one-horsepower, one-Ph, 15-/eight-amp, TEFC (totally enclosed fan cooled) motor that's pre-wired for 115-volt power, but can be converted to use 230 volts. To make it easy to apply all that power, a single-handle, variable-speed control lets the user choose the speed needed without touching the belt. And the 400 to 3,000 RPM spindle speed range provides additional flexibility.

Lights and Laser for Accuracy
To help ensure optimum accuracy, the Onyx PM2800 boasts a pair of strategically located LED work lights that are bright enough to make seeing layout marks easy, but mounted on the underside of the head to prevent glaring. A simple push-button on/off switch lets you use the LED lights only when needed. A second push-button on/off switch controls a pair of fully adjustable lasers aimed to create an "X" at the drill-bit point of entry.

Keyless Chuck and Spindle
For user-friendly operation, the Onyx PM2800 has an oversized two-inch diameter quill with a number-two Morse taper for stability even when using large bits in tough woods. There's also a high quality, keyless, 5/8-inch capacity chuck for effortless bit changes, and a quill (spindle) assembly with full 4-3/8-inch plunge capacity. Finger-operated depth stops make it easy to limit drilling depth for repetitive jobs, while three large handles make plunging the spindle easy, even when drilling large holes in tough woods.

Expandable Table for Flexibility
Measuring 14 inches by 16 inches, the main surface table gives you plenty of space for larger work pieces. If you need more room, simply slide the extensions out and the width grows to 30 inches. For added convenience, the table features twin T-slot grooves for a miter gauge or other homemade jigs. It also tilts to 90 degrees to the left or right and can be locked at any point. The Onyx PM2800 boasts a fence with a pair of flat, extruded aluminum faces that can be opened to increase the overall support to 30 inches. Splitting the fence faces also reveals the inlet for the built-in dust collection that terminates in a two-inch diameter ID port that angles out from the rear of the fence to keep the hose out of the way.

What's in the Box
One column assembly with rack and ring, one head assembly, one base, one table bracket and table, three down-feed handles, one chuck, one drift key, one arbor, one shift knob, one locking handle, all necessary hardware, manual, and warranty card.

Powermatic's Onyx PM2800 90th anniversary drill press has a heavy-duty motor, large table, and sturdy construction (click each to enlarge).

Includes PM2800 18-in Black Onyx Variable Speed Drill Press - 1792800PK, 27-in x 42-in Workshop Fatigue Mat

Performance Tool Wilmar W50005 5 Speed 1/3-HP Bench Top Drill Press

Performance Tool Wilmar W50005 5 Speed 1/3-HP Bench Top Drill Press Review

Performance Tool Wilmar W50005 5 Speed 1/3-HP Bench Top Drill Press Feature

• Ideal for shop and hobby use
• Drills metal, plastic and wood
• 1/2-Inch Spring loaded chuck with protective guard and 2-1/2-Inch Vise
• Fully adjustable machined table tilts 45 Degree left and right
• Cast iron construction CSA Approved

Wilmar W50005 5spd,1/3hp Bnch Tp Drillpress

Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch Floor Model Drill Press

Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch Floor Model Drill Press Review

Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch Floor Model Drill Press Feature

• Powerful 15-Inch floor model drill press ideal for home or professional use
• 3/4-Horsepower motor
• 16-Speeds ensure proper application for a variety of different jobs
• Includes built-in work lamp
• Weighs 180-Pounds

The Jet 3/4-Horsepower 15-Inch Floor Model Drill Press features a built-in work lamp, an on-board 5/8-inch chuck key, and a power-conserving design. It also includes a rectangular cast iron table for stability and durability, and a 45-degree table tilt and 360-degree table swing for maximum versatility. In addition, it features 16-speeds to ensure proper application for a variety of different jobs. Includes 3/4 HP 15-in 16-Speed Floor Mount Drill Press - 354166, Drill Chuck, Chuck Key

Rockler JIG IT Drill Guide

Rockler JIG IT Drill Guide Review

Rockler JIG IT Drill Guide Feature

• Allows you to drill holes perfectly perpendicular to the surface using a hand drill
• Use with our 3/8" diameter shank Forstner Bits (sold separately)
• Use with a 3/8 stop collar (sold separately)
• Rockler Exclusive

No need for a drill press! Our exclusive JIG IT Drill Guide allows you to drill holes perfectly perpendicular to the surface with just a hand drill. Use with our 3/8" diameter shank Forstner Bits. Use with a 3/8 stop collar (sold separately).