JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press

JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press Review

JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press Feature

• Cast iron head
• Large quill allows greater accuracy
• Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
• Table tilts 45°
• Large ground steel column diameter for maximum head and table support

This JET 16-speed drill press has a 115V, single-phase motor. 16 spindle speeds ensure proper application for a variety of different jobs. Large quill allows for greater accuracy. Head casting features a permanently lubricated ball bearing spindle assembly, with four heavy-duty ball bearings in an enclosed quill for longer life. HP: 3/4, Volts: 115, Speed (RPM): 200 - 3,630, Speeds (qty.): 16, Vertical Stroke: 3 1/8, 360deg Head Swivel: Yes, Draw Bar: No, Swing: 15in., Drilling Capacity (in.): 5/8 cast iron, Chuck Size (in.): 5/8, Worktable L x W (in.): 10 x 10, Light Included: No, Stand Included: No, Dimensions L x W x H (in.): 26 x 14 x 39

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press Review

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press Feature

• 2HP, 3Ph, 230V motor
• Tapping and reversing controls
• Complete coolant system
• Variable spindle speeds with a range of 65-2000 RPM

Includes 20-in 2 HP 3-Phase 230V Variable Speed Drill Press - 354210, Integrated Tapping &, Reversing Controls, Complete Coolant System, T-Slotted Work Table

Palmgren 12303 DPL30 Low-Profile Drill Press Vise, 3.0-Inch

Palmgren 12303 DPL30 Low-Profile Drill Press Vise, 3.0-Inch Review

Palmgren 12303 DPL30 Low-Profile Drill Press Vise, 3.0-Inch Feature

• Made from FC25, fine grain cast iron; Trapezoidal-thread lead screw
• Precision-ground guide bar for smooth, accurate travel and clamping; Base and bed parallel to 0.001"; Less than 0.002" jaw deflection at 2,000 lbs. clamping pressure; Jaw surfaces square to 0.002".
• Sold iron construction with stress-relieved design: Replaceable jaw plates
• Fixed jaw is grooved horizontally and vertically for holding round stock
• Four slots for secure mounting to machine table

Work Positioners & Levelers Type: Drill Press Jaw Width: 3 Jaw Opening: 3

Professional Grade 6-Inch Heavy Duty Universal Cross Slide Drill Press Vise

Professional Grade 6-Inch Heavy Duty Universal Cross Slide Drill Press Vise Review

Professional Grade 6-Inch Heavy Duty Universal Cross Slide Drill Press Vise Feature

• Provides solid, stable platform for exact centering and accurate drilling
• Cross - slide design provides two-axis precision adjustment for perfect bits placement
• Easy sure attachments to any drill press table with mutiple mounting lugs
• Heavy suty cast iron (HT200), cast aluminum handle
• Outside surface: Polishing, baking varnish processing

Lead screw: chrome plating(above one), black coating(following two). Vise and cross slide have adjustable shims for fine adjustment. Precision thread clamping and cross slide screws. Cross travel: 3-1/2" Longitudinal travel: 5-1/2" Jaw depth: 1-1/4". Maximum jaw opening: 4". Overrall height: 4-3/8"

Drill Press Tray BY PEACHTREE WOODWORKING PW934

Drill Press Tray BY PEACHTREE WOODWORKING PW934 Review

Drill Press Tray BY PEACHTREE WOODWORKING PW934 Feature

• Pre-drilled holes f/3/32" > 1/2" bits
• Adapts to any column 1-3/4" to 3-5/8"
• Swings in or out of the way
• 11" durable tray - room for you bits and your tools.
• This handy drill press tray has pre-drilled holes for 3/32" to 1/2" bits

This handy drill press tray with pre-drilled holes for 3/32" to 1/2" bits adapts to any column from 1-3/4" to 3-5/8". The 11" durable tray swings in & swivels for easy access or out for more working room.

Incra LS17WFNCSYS 17-Inch Range LS Super System For Router Tables, Band Saws & Drill Presses

Incra LS17WFNCSYS 17-Inch Range LS Super System For Router Tables, Band Saws & Drill Presses Review

Incra LS17WFNCSYS 17-Inch Range LS Super System For Router Tables, Band Saws & Drill Presses Feature

• Movable fence for router table, drill press, or band saw
• Includes the Wonder Fence, the leading split fence design, the Wonder Fence
• Adds precision for serious joinery and woodworking fans
• Designed to meet the needs of serious woodworkers and beginners alike
• Provides versatility for a variety of tasks

The world's most versatile and accurate movable fence for your router table, drill press, or band saw, gets even more useful in the LS17WFNCSYS system which includes the leading split fence design, the Wonder Fence. Designed to meet the needs of the most serious woodworker yet easy enough for even a beginner to use. The new Incra LS Super System has all of the precision and versatility of our other tools, plus a host of new features and design details that set it apart from anything else.This sytem is the ultimate in precision fence systems for serious joinery and woodworking fans. The LS stands for Lead Screw. Incra's patented Lead Screw technology (U.S. Patent #5,716,045) makes this unit the leader in precision positioners for woodworking.

General Tool 36/37 Accu Precision Drill Guide

General Tool 36/37 Accu Precision Drill Guide Review

General Tool 36/37 Accu Precision Drill Guide Feature

• Cross slide lock for accurated shaping and carving
• Positive stop for accurate drill depth control
• Dual locking knob and handle holds precise angle setting
• Folds flat for tool box storage
• V-guides automatically center round stock for drilling

Turns your hand-held drill into a mini drill press! Just attach the Drill Guide to any standard 3/8" or 1/2" drill and bore round stock, stopped holes, angled holes and edges. This tool features automatic spring action and anchoring pins for secure drilling.

Quick Set Drill Press Hold Down

Quick Set Drill Press Hold Down Review

Quick Set Drill Press Hold Down Feature

• 5" height capacity
• 1-1/2" diameter rubber foot

If you have ever been frustrated by the inadequate clamp opening and clumsiness of most drill press clamps, here is your answer. The post quickly mounts to most drill press tables with slots or holes, a bolt passes through the table and is secured with a large ring nut. To adjust the height for up to 5" of capacity, simply depress the clutch (similar to a pipe clamp) and slide the clamp head to the desired setting. Hold down pressure is provided by the cam action clamp on the head which features a 1-1/2" diameter rubber foot to help prevent marring your workpiece

Precision Drill Guide

Precision Drill Guide Review

Precision Drill Guide Feature

• Precision Drill Guide Is A Portable Drill Press!
• Don't be limited by extra wide stock that won't fit your drill press
• Chuck your electric drill to the 3/8" spindle to operate
• A depth stop is provided for accurate boring and countersinking
• Includes a three jaw 0-3/8" geared chuck

With this drill guide, you can drill any fixed angle from 45 degrees to 90 degrees drill round stock on center by using the integral Vee guides. Center edge drilling by using the anchor pins in the base for fences.

Neiko Tools USA 5 Speed 8" Mini Drill Press with Laser

Neiko Tools USA 5 Speed 8" Mini Drill Press with Laser Review

Neiko Tools USA 5 Speed 8" Mini Drill Press with Laser Feature

• Bench Top Design
• Powerful motor offers consistent spindle speeds
• Easy change gearing for variable speeds

Neiko Tools U.S.A. 5 Speed 8" Mini Drill Press with Laser, Motor Power: 120V/60HZ/300W, 5 Non-Load Speeds: 620 - 3100 RPM, CSA/CUS Approved

MLCS 9765 Drill Press Table

MLCS 9765 Drill Press Table Review

MLCS 9765 Drill Press Table Feature

• A quality table at an unbeatable price
• Add versatility and precision to your drill press
• New and improved
• 2 T-tracks included, adjustable Fence for maximum holding power

Our 12" x 24" Drill Press Table is made of 7/8" thick MDF/Melamine. Includes two T-Tracks for hold-downs, an adjustable fence that guarantees maximum holding power and a removable insert that can be drilled for any size sanding drum. Mounting & Compatibility Note: This table mounts to all drill presses, most without any modifications. The table will adapt to Drill Presses that have parallel slots 9-5/8" on center bolts or it can clamp from the outside on tables that are less than 9-3/8" wide. If your table does not fit the above criteria, you can easily redrill a 1-3/8" hole and reposition the rods/clamps anywhere else as needed. *Drill Press Not Included.*

Drill press quill feed return spring NEW 2 1/2"

Drill press quill feed return spring NEW 2 1/2" Review

Drill press quill feed return spring NEW 2 1/2" Feature

• Replaces worn out quill feed return springs
• Fits many 15-17 drill presses on the market!
• Includes housing and coil spring assembly

This listing features a drill press quill return spring for replacement of many existing quill springs on common 15-17" drill presses. This is the chrome housed spring that returns the quill to the top after you have completed drilling. This is a 2 1/2" size, we do have smaller or larger ones available, please contact us at our customer service number or e-mail us with any questions.

Hitachi B13F 10-Inch Benchtop Drill Press with Laser

Hitachi B13F 10-Inch Benchtop Drill Press with Laser Review

Hitachi B13F 10-Inch Benchtop Drill Press with Laser Feature

• Motor: 1/3 HP, 3.5 amp, continuous duty, induction-type, 120v, 60 Hz
• 5 Speeds easy change with V-belt and pulleys : 680, 1160, 1780, 2380, 3000
• Drilling Capacity 1/2 inch in cast iron; Spindle Taper JT33; Spindle Travel 2.5 in; Chuck size 1/16 to 1/2 in. drill bit range
• Table 7.75 x 7.75 in; to spindle 10.75 in; L-R tilt 45 deg; Base to spindle 15.75 in
• Includes: Laser assembly, Drill chuck 1/2 in

The Hitachi B13F 10-Inch Drill Press with Laser is ideal for drilling applications that require precision and accuracy. The compact press features an adjustable X-Y laser for precision drilling and five speed settings for handling a variety of different materials. The powerful induction motor and cast-iron table are built for durability, and the smooth gear system makes for trouble-free use.

For precision, this drill press includes an X-Y axis laser and a locking depth-scale. View larger.

B13F 10-Inch Drill Press with Laser Tool Specifications Chuck 1/16"-1/2" RPMs 680; 1,160; 1,780; 2,380; 3,000 Weight 61.8 lbs. X-Y Axis Laser Fully Adjustable Motor 1/3 HP Induction Motor Cast Iron Table 7-13/16" square; tilts up to45° (L x R) Table Adjustment Smooth Rackand Pinion Gearing System

Fully Adjustable Features for Accurate Drilling
The B13F's integrated Class III-A laser-beam adjusts along the X-Y axis for pinpoint accuracy when drilling. Easy laser adjustment knobs allow for easy calibration of the drill press.

Additionally, the B13F lets you lock in depths for precise drilling. The depth-scale ring, located at the base of the feed handle, means you can make quick and easy depth adjustments without the need for special tools.

Powerful Induction Motor with Five Speed Settings
The B13F features a 1/3-horsepower induction motor that is powerful enough to drill a wide variety of materials, including wood, aluminum, plastic, mild steel, stainless steel and more. And with five speed settings--680, 1,160, 1,780, 2,380, and 3,000 RPM--you can choose the speed that's best for your material and bit size (the chuck accepts drill bits from 1/16- to 1/2-inch).

Smart Design That's Built to Last
Everything, from the induction motor to the 7-13/16-inch-square cast-iron table, is built for reliable performance. The cleverly designed table moves along a smooth rack-and-pinion gearing system and locks in place for reliable support during operation. An added bonus, the table adjusts 45 degrees to the right or left for angled drilling.

At 67.8 pounds, the B13F is lightweight enough for easy storage and portability. It is backed by Hitachi's two-year warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
B13F Drill Press, hex wrench, two batteries, and chuck key 10" bench top drill press features a fully adjustable X-Y axis laser for presicion drilling and pinpoint accuracy. It delivers 5 speeds (620, 1150, 1770, 2450, and 3100 RPM) to tackle many different applications. The 1/3 HP induction motor also adds to its longer life and quieter operation. The cast-iron table measures 7-13/16" square and tilts up to 45 left or right. Easy adjustment of the table height is achieved by a smooth rack and pinion gearing system. The chuck accepts bits from 1/16" up 1/2". Drill press weighs 61.8 lb. and is compact so it can be easily moved out of the way when not in use. Covered by Hitachi's 2 year warranty.

DRILL PRESS QUICK SET HOLD DOWN By Peachtree Woodworking - PW3339

DRILL PRESS QUICK SET HOLD DOWN By Peachtree Woodworking - PW3339 Review

DRILL PRESS QUICK SET HOLD DOWN By Peachtree Woodworking - PW3339 Feature

• Mount quickly to most drill press tables or workbench. (Drill press, bit & wood NOT INCLUDED)
• On the drill press a bolt passes through the table & secured with large ring nut
• Hardware also provided to be used in 3/4" hole on your workbench to secure stock.
• Hold down pressure is provided by the cam action clamp on the head
• 1-1/2" dia. Rubber foot to help prevent marring.

The post quickly mounts to most drill press tables or workbenches. Mounting hardware included for both applications. The hold down pressure is provided by the cam action clamp on the head which features a 1-1/2" round rubber foot.

Big Horn 19630 Drill Press Vise Clamp

Big Horn 19630 Drill Press Vise Clamp Review

Big Horn 19630 Drill Press Vise Clamp Feature

• Holds work firmly to drilling table
• Fast locking of pieces in jig setups

The Big Horn 19630 is a 9 Inch Vise Clamp. The strong, fast acting 9 inch clamp, with 3-1/2 Inch throat attaches easily to drill press or other shop fixtures. Features: Holds work firmly to drilling table Fast locking of pieces in jig setups Increases efficiency, accuracy, and safety. Use for easy locking in jig setups when drilling or welding. Holds work firmly to drilling table. What's In the Box: Big Horn 19630 9 Inch Vise Clamp

Woodpeckers Drill Press Table

Woodpeckers Drill Press Table Review

Woodpeckers Drill Press Table Feature

• 16" x 23" x 1" surface with MDF core
• MicroDot laminate to better "grip" the work piece under pressure
• Two double-wide T-Tracks are embedded and bolted in place from underneath
• Laser engraved fence face with a center scale (zero in the center)
• For 13" and larger drill presses

Woodpeckers Drill Press Table features a generous 16" x 23" x 1" surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2" thick material. Two double-wide T-tracks are embedded and bolted in place from underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-track is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to your drill press, no further adjustment is needed. The 36" fence uses the same double-wide track as the table to give you more stop and accessory mounting options. The fence comes with a simple L stop, and optional flip stops can be added for increased versatility. Mounting hardware is included.