JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press

JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press Review

JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press Feature

• Cast iron head
• Large quill allows greater accuracy
• Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
• Massive T-slotted production work table (Model J-2550 only)
• Table tilts 45°

Includes J-2550, 20-in Floor Model Drill Press 1HP - 354402

Milwaukee 4209-1 Electromagnetic Drill Press

Milwaukee 4209-1 Electromagnetic Drill Press Review

Milwaukee 4209-1 Electromagnetic Drill Press Feature

• Solid state electronic switching, 1-1/4-inch capacity, 12.5-amp motor, 750/375 RPM, feedback speed control
• Line lock-out prevents tool from operating should voltage be restored to an interrupted line
• Voltage of 120 AC, 12.5 amps1-1/4-inch drill capacity, no load dpeed
• Nine-foot fixed cord, grounded construction, 1-inch tap capacity
• Drill point pressure of 1,530 to 1,600 pounds, adjustable base, weight 72 pounds

This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1 1/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 11in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 750/375, Drilling Capacity (in.): 1 1/4, Chuck Size (in.): No. 3MT

DELTA 17-922 9-Inch Drill Press Vise Clamp

DELTA 17-922 9-Inch Drill Press Vise Clamp Review

DELTA 17-922 9-Inch Drill Press Vise Clamp Feature

• Attaches quickly to drill press table
• Instant grip - instant release
• Knurled knob allows for adjustment
• 4-1/2 by 4-inch jaw opening ideal for medium- to large-sized stock
• Included with vise clamp: mounting nut

With the DELTA 17-922 9-inch Drill Press Vise Clamp, you'll have a better and safer grip on your drilling projects. With a vise clamp that quickly and easily installs in drill press table slots, you'll have a safer and more accurate way to drill. A squeeze-lock design and release lever makes clamping and releasing a quick endeavor, and a knurled knob at the end of the handle lets you make adjustments easily. The DELTA 17-922 9-inch Drill Press Vise Clamp includes a mounting nut.

Milwaukee 4208-1 12.5 Amp Electromagnetic Drill Press with 1-1/4-Inch Motor and No. 3 Morse Taper

Milwaukee 4208-1 12.5 Amp Electromagnetic Drill Press with 1-1/4-Inch Motor and No. 3 Morse Taper Review

Milwaukee 4208-1 12.5 Amp Electromagnetic Drill Press with 1-1/4-Inch Motor and No. 3 Morse Taper Feature

• 12.5 amp motor
• 1-1/4" drill capacity
• 500/250 RPM no load speed
• Solid state electronic switching
• Feedback speed control

This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1 1/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 11in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 500/250, Speeds (qty.): 2, Drilling Capacity (in.): 1 1/4, Chuck Size (in.): No. 3MT

Promax 79251 Precision Drill Guide Tool for Portable and Electric Drills

Promax 79251 Precision Drill Guide Tool for Portable and Electric Drills Review

Promax 79251 Precision Drill Guide Tool for Portable and Electric Drills Feature

• 3/8-Inch chuck, 10-mm, 3/8 by 24 thread
• Drills perpendicular to surface, oblique angles and round rods
• Positive stop for accurate drill depth control
• Dual locking knobs for holding precise angle setting
• Lock pins hold tool firmly on flat surfaces and center the tool for drilling

Our precision drill guide tool can be used as a portable guide or fixed onto a table as a mini drill press guide. This drill guide delivers drill press accuracy and versatility to your handheld drilling applications. This tool will accurately drill round rods, oblique angles and perpendicular.3/8-Inch chuck, 10-mm, 3/8 by 24 threadDrills perpendicular to surface, oblique angles and round rodsPositive stop for accurate drill depth controlDual locking knobs for holding precise angle settingLock pins hold tool firmly on flat surfaces and center the tool for drilling

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW Review

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW Feature

• Drill / Rotary Stand
• Collet Size: 1-7/16" (43 mm)
• Drilling Depth: 2.36" (0-60 mm)
• Over All Dimension: 6-1/4" x 13-1/2" x 19-1/2"

Rockler Drill Guide Kit

Rockler Drill Guide Kit Review

Get straight, true holes without a drill press! Just pop a steel bushing into the plastic guide and your hand drill will bore perfectly perpendicular holes even on spheres and cylinders. Ingenious design also centers your drill bit on corners, a tough hole to start. Includes 6 bushings for 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" bits.

2 MT to 33 JT Drill Chuck Arbor

2 MT to 33 JT Drill Chuck Arbor Review

2 MT to 33 JT Drill Chuck Arbor Feature

• Shank Size: 2 Morse Taper
• Chuck (Jacobs) Taper: 33JT
• Note: Photo shows a Morse Taper to Jacobs Taper arbor, but not necessarily this specific arbor.
• Please do not use the photo to judge the relative size of the tapers.

For chucks with Jacobs taper backs. Determine both shank size (to fit into your Drill Press,tailstock, etc.) & chuck (Jacobs) taper to order the correct arbor. Morse Taper arbors have a tang end (Not available with a drawbar end.).

HTC HTC2000 Universal Mobile Base

HTC HTC2000 Universal Mobile Base Review

HTC HTC2000 Universal Mobile Base Feature

• Universal mobile base with 400-pound capacity; forms into squares or rectangles
• Four wheels; side rails with holes every inch; 12 by 12-inch to 36 by 36-inch or up to 20 by 52-inches
• Durable hard rubber wheels and metal; assembly required
• Includes wheels, base, and hardware
• 16-pounds; lifetime warranty

If you're like us, you've crammed more tools into your workshop than can really fit. Luckily, an HTC universal mobile base (or two) can make a world of difference. The base is sturdy and easy to assemble, plus--unlike any other mobile base on the market--it adjusts to fit virtually any large woodworking machine, forming squares from 12 by 12 to 36 by 36 inches and rectangles as big as 20 by 52 inches. Holes at 1-inch increments let you choose any shape in between, and wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. Moving equipment around a crowded shop has never been this easy. --Jon Groebner With the HTC-2000 Adjustable Mobile Base, size is no longer an issue. Fully adjustable mobile base features side rails and corner pieces with holes spaced every 1 inch to insure the perfect fit for your machine. Move bandsaws, table saws, sanders, drill presses, jointers, planers, and much more.

Northern Industrial Mini Drill Press - 5-Speed, 1/3 HP

Northern Industrial Mini Drill Press - 5-Speed, 1/3 HP Review

Northern Industrial Mini Drill Press - 5-Speed, 1/3 HP Feature

• Threaded depth lock
• Screwdriver handle
• 11 5/8in. x 7 1/3in. base

Mini drill press lets you drill with accuracy. HP: 1/3, Volts: 120, Speed (RPM): 620-3100, Speeds (qty.): 5, Vertical Stroke: 2in., Swing: 8in., Drilling Capacity (in.): 1/2, Chuck Size (in.): 1/2, Worktable L x W (in.): 6 5/8 x 6 9/16, Dimensions L x W x H (in.): 7 x 16 15/16 x 22 1/2

DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets

DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets Review

DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets Feature

• Mortising attachment comes with four popular mortising chisel and bit sets
• 1/4-inch, 5/16-inch, 3/8-inch, and 1/2-inch set
• Also includes a handy carrying case that holds everything for easy storage
• Offers large 4-inch capacity under hold-downs, 2-3/4-inches from ends of hook rods to fence
• Also fits drill presses with quill diameters of 66-milimeters, 50.8-milimeters, 48-milimeters, and 38-milimeters

Can’t fit a square peg in a round hole? Drill a new one! The Delta 17-924 Mortising Attachment attaches to your dress press and turns it into a mortising machine. Includes four popular mortising chisel and bit sets and convenient carrying case along with attachment. Use it with Delta models 11-980, 11-990, 14-070 & 17-900 drill presses and 11-090 radial drill press; and Sears model 21313, 21315 & 21317 drill presses.

Palmgren 12253 30 Drill Press Vise 2.5 Inch

Palmgren 12253 30 Drill Press Vise 2.5 Inch Review

Palmgren 12253 30 Drill Press Vise 2.5 Inch Feature

• Made in USA
• Overall height 2-9/16 inch
• Overall length to end of lead screw 8 inch
• Center of vise is open for holding work through body of vise
• Vise

Drill Press Vises Type: Drill Press Vises Jaw Opening: 2-1/2 Throat Depth: 1-1/2

4.0 MM (.1575) DRILL STOP

4.0 MM (.1575) DRILL STOP Review

4.0 MM (.1575) DRILL STOP Feature

• Steel drill stops
• Held solidly in place with two set screws to give positive control on depth of drill cut
• 7/16 diameter
• 1/2 overall length

These steel drill stops are held solidly in place with two set screws, to give positive control on depth of drill cut.

Powermatic PM2800 1792800 18-Inch Variable Speed Drill Press

Powermatic PM2800 1792800 18-Inch Variable Speed Drill Press Review

Powermatic PM2800 1792800 18-Inch Variable Speed Drill Press Feature

• Powered by a heavy duty 1-Horsepower, 1-Phase 115/230-Volt TEFC motor for the big jobs
• Head mounted dual laser guide system provides a consistent drilling cross point on the work piece
• A new larger table system with dual extensions for the largest woodworking table on the market, features twin T-slot grooves for a miter gauge or other homemade jigs
• Built in dual LED work lights eliminates cast shadows
• Newly designed tables tilts 90-Degree and has a positive stop at 0-Degree

Designed with the needs of the professional woodworker in mind, the Powermatic PM2800 18-Inch Variable-Speed Drill Press offers innovative features other models simply cannot match. Built for ultra-dependable performance, the PM2800 features dual LED work lights and a dual laser guide system. Both the expandable work table and motor are the industry's largest in the PM2800's class.

The PM2800 Variable Speed Drill Press At a Glance: Powered by a heavy duty 1hp, 1Ph, 115/230V TEFC motor for big jobs Largest woodworking table in its class for incredible flexibility 5/8-inch keyless chuck for no-hassle bit changes Newly designed table tilts 90 degrees, with a positive stop at 0° Dual LED work lights and dual laser guide system for improved accuracy

Single-handle, variable-speed control lets you choose your speed without touching the belt. View larger.

Laser guides allow for precision drilling. View larger.

The expandable surface table provides up to 30" of sturdy support. View larger.

Durable and Versatile
With high-end castings and ultra-tough steel components, the PM2800 is as durable as it is versatile.The three and one-eighth-inch diameter steel column, over-sized quill, and cast-iron table system providethe rigidity needed for true accuracy and repeatability. The all cast-iron base offers stability,decreases vibrations, and comes with holes in each corner for securing the PM2800 to a suitable floor.

For incredible versatility, the PM2800 offers a full 18-inch swing, a spindle-to-base clearance of 47 inches, and a maximum spindle-to-table capacity of 26-1/2 inches.

Powerful One-Horsepower TEFC Motor
The PM2800 comes equipped with a heavy-duty one-horsepower, one-Ph, 115-/230-volt, fifteen-/eight-amp,TEFC (totally enclosed fan cooled) motor that's pre-wired for 115-volt power, but can be converted to use 230 volts.

To make it easy to apply all that power, a single-handle, variable-speed control lets the user choose the speedneeded without touching the belt. And the 400 to 3,000 RPM spindle speed range provides additional flexibility.

Lights and Laser for Accuracy
To help ensure optimum accuracy, the PM2800 boasts a pair of strategically located LED work lights that are bright enoughto make seeing layout marks easy, but mounted on the underside of the head to prevent glaring. A simple push-button On/Offswitch lets you use the LED lights only when needed.

A second push-button On/Off switch controls a pair of fully adjustablelasers, aimed to create an "X" at the drill-bit point of entry.

Keyless Chuck and Spindle
For user-friendly operation, the PM2800 has an oversized two-inch diameter quill with a number-two Morse taper for stabilityeven when using large bits in tough woods. There's also a high-quality, keyless, 5/8-inch capacity chuck for effortless bitchanges, and a quill (spindle) assembly with full 4-3/8-inch plunge capacity.

Finger-operated depth stops make it easy tolimit drilling depth for repetitive jobs, while three large handles make plunging the spindle easy, even when drilling largeholes in tough woods.

Expandable Table for Flexibility
Measuring 14.0 x 16.0 inches (W x D), the main surface table gives you plenty of space for larger workpieces.If you need more room, simply slide the extensions out and the width grows to 30 inches. For added convenience,the table features twin T-slot grooves for a miter gauge or other homemade jigs. It also tilts to 90-degrees tothe left or right, and can be locked at any point.

The PM2800 boasts a fence with a pair of flat, extruded aluminum faces that can be opened to increase the overallsupport to 30 inches. Splitting the fence faces also reveals the inlet for the built-in dust collection thatterminates in a two-inch diameter ID port that angles out from the rear of the fence to keep the hose out of the way.

Dimensions and Warranty Information
The PM2800 measures approximately 23.5 x 68.0 x 31.5 inches (W x H x D), weighs 209 pounds, and is backed by a five-year warranty.

What's in the Box
One column assembly with rack and ring; one head assembly; one base; one table bracket and table; three down-feed handles; one chuck; one drift key; one arbor; one shift knob; one locking handle; all necessary hardware; manual; and warranty card.
Includes PM2800 18-in Variable Speed Drill Press - 1792800

Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck

Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck Review

Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck Feature

• 12.5 amp motor
• 3/4" drill capacity
• 350 RPM no load speed
• Solid state electronic switching
• Feedback speed control

This combination unit features the 4202 fixed position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed base features solid state electronic switching and an 9in. drill travel. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 350, Drilling Capacity (in.): 3/4, Chuck Size (in.): 3/4