4" Drill Press Vise

4" Drill Press Vise Review

UPC: 794685561825

4" Drill Press Vise

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount Review

1/32"-1/2" VME Key Type Drill Chuck with 33 Jacobs Taper Mount Feature

• Capacity: 1/32"-1/2"
• 33 Jacobs Taper

Premium Quality Import - With Key. fits onto a 33 Jacobs Taper arbor or spindle.

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter Review

DELTA 15-344 15-Inch Three Phase 200-Volt Variable Speed Drill Press, with Production Table and Magnetic Starter Feature

• Extra-large spindle bearings, spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings
• Wide, test-proven speed range, true 10-to-1 speed ratio, 450 to 4,700 rpm with a 1,725 rpm motor
• Quick belt tension release is provided by the pivoting motor mounting plate, reverse self-locking taper on the plunger
• Extra-long quill travel gives extra depth for deep-hole jobs like skip and gang drilling
• Six speeds offers unbelievably wide range of speeds

The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

5 Speed - Bench Top Drill Press

5 Speed - Bench Top Drill Press Review

5 Speed - Bench Top Drill Press Feature

• 1/2 HP,
• 120 V, 60 Hz, 2.4 amp
• 5 Quick change speed settings,

Ideal addition to any workshop, 1/2 HP, 120 V, 60 Hz, 2.4 amp, 5 Quick change speed settings, No load speed 760-3070 RPM, 1/2" drill chuck, Quill travel - 50mm, Drilling depth is adjustable with positive quill stop., For mortising, it is good to have a long quill travel and a positive quill stop for reproducibility. Press height: 22 1/2", Sturdy 11" x 7" base, Adjustable table tilts left or right for angled drilling operations, Distance from center of chuck to the support pole is 4", Table size 6 3/8" x 6 3/8", 3 prong plug, UL listed

IRWIN 226340 4-Inch Drill Press Vise

IRWIN 226340 4-Inch Drill Press Vise Review

IRWIN 226340 4-Inch Drill Press Vise Feature

• 4-Inch Jaw Width
• 4-1/2-Inch Clamping Capacity
• 1/2-Inch Throat Depth

Whatever the dimensions of your project or the materials used, IRWIN has the clamping tools to help you achieve professional results faster and easier.

WoodRiver 14-LED Drill Press Light

WoodRiver 14-LED Drill Press Light Review

WoodRiver 14-LED Drill Press Light Feature

• 14 white light LEDs arranged in a circular housing
• Fits drill presses with quill diameters 1-5/8" to 3-7/8"
• Strong magnet fixes switch to any steel or cast-iron surface
• Installs without tools using three thumbscrews
• Power supplied by a wall transformer

Every drill press naturally casts a shadow on your workpiece, so some sort of extra light is a necessity for safe effective operation. By attaching this LED light to the drill press quill it becomes the most efficient light source available.

Craftsman 10 in Bench Drill Press w/ Laser Trac

Craftsman 10 in Bench Drill Press w/ Laser Trac Review

Craftsman 10 in Bench Drill Press w/ Laser Trac Feature

• Five operating speeds with a range between 620 - 3100 RPM
• 6.0 Amp, 120 Volts, 60 Hz motor
• Rack and Pinion table elevation makes adjusting the table height easy and accurate
• Scaled steel fence helps align, guide and brace workpieces, stop block for repetitive drilling jobs

Powerful 6.0 Amp motor provides this Craftsman® drill press with long lasting and smooth operation for household projects. 1/2" keyed chuck, ideal for metal or wood drill bits and sanding drums with up to a 1/2" shank. Five speed settings ranging from 620-3100 RPM. Quick belt tension and release - allows for rapid spindle speed changes. Rack and Pinion table elevation system for quick and easy adjusting.